Magnetic Yokes
Instrument Profile
NEWS: Convenient by Experience – measurement of field strength
The DEUTROMETER 3873 measures magnetic fields, both Direct & Alternating in the low-frequency range. Specialist knowledge gained by Karl Deutsch acquired over many years enabled the development and assists the continued evolvement of our Deutrometer. The 3873 being current Karl Deutsch model.
The DEUTROMETER 3873 at a glance
- offers an auto measuring mode for uncomplicated measurement
- complies with EN ISO 9934-3:2002 section 9.3
- is suitable for measurements according to EN ISO 17638 section 5.5.2
- Two selectable display modes: Standard indication & Bar graph indication
- “True RMS” mean values in AC fields
- Splash-proof housing (IP 54)
- Made in Germany by Karl Deutsch
- Control panel illuminates under UV light
- uses up-to-date techniques to conveniently assist the operator in ongoing measuring use
- Optical and acoustical limit alarm
- Battery-saving illumination
- Integrated stand
- is reliable, precise and robust
Operating modes
- Measurement of alternating/direct field (automatic detection)
- Measurement of alternating/direct field with limit monitoring (automatic detection)
- Measurement of direct field (e.g. for residual fields)
- Measurement of alternating field (e.g. measurement of the magnetizing strength)
With Magnetic Yokes non-destructive crack detection of ferromagnetic work pieces the DEUTROMETER is mainly used for the measurement of the tangential field strength during the magnetization and for the measurement of the residual field after any demagnetization process.
In addition the DEUTROMETER from Magnetic Yokes can be used also as a flux density measuring instrument (Tesla meter).
During the magnetic particle crack detection by Magnetic Yokes work pieces are magnetized by means of a current or a field flow.
For a secure indication of cracks in each case a minimum magnetizing field strength must be reached. After termination of the test cycle the work piece becomes demagnetized again and environmentally neutral.
In a quick and precise manner the DEUTROMETER 3873 is capable of checking the required strength of the magnetizing field was reached and the residual field strength after demagnetization is below the limit. In doing so the DEUTROMETER automatically selects the required operating mode. Magnetic Yokes encourage the use of the DEUTROMETER for precision field analysis.
